GF-78 Flux Coated Low Fuming Bronze in 1/8" (3.2mm) diameter is a high-quality bronze with additions of manganese and iron to increase hardness and strength while limiting zinc fuming. It is primarily used on steel and copper.
Size: 1/8" DIA
Flux Coated
Length: 36"
Alloy 681 UNS/CDA C68100
AWS A5.8 Class RBCuZn-C
ASME SFA5.8 Class RBCuZn-C
Cu: 56.0 - 60.0%
Zn: Balance
Fe: 0.25 - 1.20%
Si: 0.04 - 0.20%
Al: 0.01%
Pb: 0.05%
Mn: 0.01 - 0.50%
Sn: 0.80-1.10%
Total Others*: 0.50%
*Total Others is copper (Cu) plus the sum of the named elements is 99.5 min. - Single Values are maximum unless otherwise specified. - Certifications are available upon request.
GF-78 Flux Coated Low Fuming Bronze in 1/4" (6.4mm) diameter is a high-quality bronze with additions of manganese and iron to increase hardness and strength while limiting zinc fuming. It is primarily used on steel and copper.
Size: 1/4" DIA
Flux Coated
Length: 36"
Alloy 681 UNS/CDA C68100
AWS A5.8 Class RBCuZn-C
ASME SFA5.8 Class RBCuZn-C
Cu: 56.0 - 60.0%
Zn: Balance
Fe: 0.25 - 1.20%
Si: 0.04 - 0.20%
Al: 0.01%
Pb: 0.05%
Mn: 0.01 - 0.50%
Sn: 0.80-1.10%
Total Others*: 0.50%
*Total Others is copper (Cu) plus the sum of the named elements is 99.5 min. - Single Values are maximum unless otherwise specified. - Certifications are available upon request.
GF-78 Low Fuming Bronze in 3/32" (2.4mm) diameter is a high-quality bronze with additions of manganese and iron to increase hardness and strength while limiting zinc fuming. It is primarily used on steel and copper. size.
Size: 3/32" DIA
Length: 36"
Alloy 681 UNS/CDA C68100
AWS A5.8 Class RBCuZn-C
ASME SFA5.8 Class RBCuZn-C
Cu: 56.0 - 60.0%
Zn: Balance
Fe: 0.25 - 1.20%
Si: 0.04 - 0.20%
Al: 0.01%
Pb: 0.05%
Mn: 0.01 - 0.50%
Sn: 0.80-1.10%
Total Others*: 0.50%
*Total Others is copper (Cu) plus the sum of the named elements is 99.5 min. - Single Values are maximum unless otherwise specified. - Certifications are available upon request.
GF-78 Low Fuming Bronze in 3/16" (4.8mm) diameter is a high-quality bronze with additions of manganese and iron to increase hardness and strength while limiting zinc fuming. It is primarily used on steel and copper.
Size: 3/16" DIA
Length: 36"
Alloy 681 UNS/CDA C68100
AWS A5.8 Class RBCuZn-C
ASME SFA5.8 Class RBCuZn-C
Cu: 56.0 - 60.0%
Zn: Balance
Fe: 0.25 - 1.20%
Si: 0.04 - 0.20%
Al: 0.01%
Pb: 0.05%
Mn: 0.01 - 0.50%
Sn: 0.80-1.10%
Total Others*: 0.50%
*Total Others is copper (Cu) plus the sum of the named elements is 99.5 min. - Single Values are maximum unless otherwise specified. - Certifications are available upon request.
GF-78 Low Fuming Bronze in 1/16" (1.6mm) diameter is a high-quality bronze with additions of manganese and iron to increase hardness and strength while limiting zinc fuming. It is primarily used on steel and copper.
Size: 1/16" DIA
Length: 36"
Alloy 681 UNS/CDA C68100
AWS A5.8 Class RBCuZn-C
ASME SFA5.8 Class RBCuZn-C
Cu: 56.0 - 60.0%
Zn: Balance
Fe: 0.25 - 1.20%
Si: 0.04 - 0.20%
Al: 0.01%
Pb: 0.05%
Mn: 0.01 - 0.50%
Sn: 0.80-1.10%
Total Others*: 0.50%
*Total Others is copper (Cu) plus the sum of the named elements is 99.5 min. - Single Values are maximum unless otherwise specified. - Certifications are available upon request.
GF-78 Low Fuming Bronze in 1/8" (3.2mm) diameter is a high-quality bronze with additions of manganese and iron to increase hardness and strength while limiting zinc fuming. It is primarily used on steel and copper.
Size: 1/8" DIA
Length: 36"
Alloy 681 UNS/CDA C68100
AWS A5.8 Class RBCuZn-C
ASME SFA5.8 Class RBCuZn-C
Cu: 56.0 - 60.0%
Zn: Balance
Fe: 0.25 - 1.20%
Si: 0.04 - 0.20%
Al: 0.01%
Pb: 0.05%
Mn: 0.01 - 0.50%
Sn: 0.80-1.10%
Total Others*: 0.50%
*Total Others is copper (Cu) plus the sum of the named elements is 99.5 min. - Single Values are maximum unless otherwise specified. - Certifications are available upon request.
Gasflux premium C-04™ Nickel Bronze Brazing rod in 1/16" (1.6mm) size. Gasflux C-04™ Nickel Bronze is a specially formulated low fuming copper/zinc alloy with additions of nickel, manganese, and iron to improve flow, increase strength, limit zinc fuming and improve flow characteristics. It is primarily used on steels and copper.
Size: 1/16" DIA
Length: 36"
Alloy 680 UNS/CDA C68000
AWS A5.8 Class RBCuZn-B
ASME SFA5.8 Class RBCuZn-B
Cu: 56.0 - 60.0
Zn: Balance
Fe: 0.25 - 1.20
Si: 0.04 - 0.20
Al: 0.01
Pb: 0.05
Ni: 0.20 - 0.80
Sn: 0.80-1.10
Total Others*: 0.50
*Total Others is copper (Cu) plus the sum of the named elements is 99.5 min. - Single Values are maximum unless otherwise specified. - Certifications are available upon request.
Gasflux premium C-04™ Nickel Bronze Brazing rod in 1/8" (3.2mm) size. Gasflux C-04™ Nickel Bronze is a specially formulated low fuming copper/zinc alloy with additions of nickel, manganese, and iron to improve flow, increase strength, limit zinc fuming and improve flow characteristics. It is primarily used on steels and copper.
Size: 1/8" DIA
Length: 36"
Alloy 680 UNS/CDA C68000
AWS A5.8 Class RBCuZn-B
ASME SFA5.8 Class RBCuZn-B
Cu: 56.0 - 60.0
Zn: Balance
Fe: 0.25 - 1.20
Si: 0.04 - 0.20
Al: 0.01
Pb: 0.05
Ni: 0.20 - 0.80
Sn: 0.80-1.10
Total Others*: 0.50
*Total Others is copper (Cu) plus the sum of the named elements is 99.5 min. - Single Values are maximum unless otherwise specified. - Certifications are available upon request.
GF-78 Low Fuming Bronze in 1/4" (6.4mm) diameter is a high-quality bronze with additions of manganese and iron to increase hardness and strength while limiting zinc fuming. It is primarily used on steel and copper.
Size: 1/4" DIA
Length: 36"
Alloy 681 UNS/CDA C68100
AWS A5.8 Class RBCuZn-C
ASME SFA5.8 Class RBCuZn-C
Cu: 56.0 - 60.0%
Zn: Balance
Fe: 0.25 - 1.20%
Si: 0.04 - 0.20%
Al: 0.01%
Pb: 0.05%
Mn: 0.01 - 0.50%
Sn: 0.80-1.10%
Total Others*: 0.50%
*Total Others is copper (Cu) plus the sum of the named elements is 99.5 min. - Single Values are maximum unless otherwise specified. - Certifications are available upon request.
GF-72 Nickel Silver Brazing Rod in 3/16" (4.8mm) diameter is a high-quality copper copper/zinc alloy with approximately 10% nickel (Ni) to limit fuming and enhance strength. It is primarily used on steel and carbide.
Size: 3/16" DIA
Length: 36"
Alloy 773 UNS/CDA C77300
AWS A5.8 Class RBCuZn-D
ASME SFA5.8 Class RBCuZn-D
Cu: 46.0 - 50.0%
Zn: Balance
Si: 0.04 - 0.25%
Al: 0.01%
Pb: 0.05%
Ni: 9.0 - 11.0%
P: 0.25%
Total Others*: 0.50
*Total Others is copper (Cu) plus the sum of the named elements is 99.5 min. - Single Values are maximum unless otherwise specified. - Certifications are available upon request.
GF-72 Nickel Silver Brazing Rod in 3/32" (2.4mm) diameter is a high-quality copper copper/zinc alloy with approximately 10% nickel (Ni) to limit fuming and enhance strength. It is primarily used on steel and carbide.
Size: 3/32" DIA
Length: 36"
Alloy 773 UNS/CDA C77300
AWS A5.8 Class RBCuZn-D
ASME SFA5.8 Class RBCuZn-D
Cu: 46.0 - 50.0%
Zn: Balance
Si: 0.04 - 0.25%
Al: 0.01%
Pb: 0.05%
Ni: 9.0 - 11.0%
P: 0.25%
Total Others*: 0.50
*Total Others is copper (Cu) plus the sum of the named elements is 99.5 min. - Single Values are maximum unless otherwise specified. - Certifications are available upon request.
GF-72 Nickel Silver Brazing Rod in 1/16" (1.6mm) diameter is a high-quality copper copper/zinc alloy with approximately 10% nickel (Ni) to limit fuming and enhance strength. It is primarily used on steel and carbide.
Size: 1/16" DIA
Length: 36"
Alloy 773 UNS/CDA C77300
AWS A5.8 Class RBCuZn-D
ASME SFA5.8 Class RBCuZn-D
Cu: 46.0 - 50.0%
Zn: Balance
Si: 0.04 - 0.25%
Al: 0.01%
Pb: 0.05%
Ni: 9.0 - 11.0%
P: 0.25%
Total Others*: 0.50
*Total Others is copper (Cu) plus the sum of the named elements is 99.5 min. - Single Values are maximum unless otherwise specified. - Certifications are available upon request.
GF-72 Nickel Silver Brazing Rod in 1/8" (3.2mm) diameter is a high-quality copper copper/zinc alloy with approximately 10% nickel (Ni) to limit fuming and enhance strength. It is primarily used on steel and carbide.
Size: 1/8" DIA
Length: 36"
Alloy 773 UNS/CDA C77300
AWS A5.8 Class RBCuZn-D
ASME SFA5.8 Class RBCuZn-D
Cu: 46.0 - 50.0%
Zn: Balance
Si: 0.04 - 0.25%
Al: 0.01%
Pb: 0.05%
Ni: 9.0 - 11.0%
P: 0.25%
Total Others*: 0.50
*Total Others is copper (Cu) plus the sum of the named elements is 99.5 min. - Single Values are maximum unless otherwise specified. - Certifications are available upon request.
GF-72 Nickel Silver Brazing Rod in 1/4" (6.4mm) diameter is a high-quality copper copper/zinc alloy with approximately 10% nickel (Ni) to limit fuming and enhance strength. It is primarily used on steel and carbide.
Size: 1/4" DIA
Length: 36"
Alloy 773 UNS/CDA C77300
AWS A5.8 Class RBCuZn-D
ASME SFA5.8 Class RBCuZn-D
Cu: 46.0 - 50.0%
Zn: Balance
Si: 0.04 - 0.25%
Al: 0.01%
Pb: 0.05%
Ni: 9.0 - 11.0%
P: 0.25%
Total Others*: 0.50
*Total Others is copper (Cu) plus the sum of the named elements is 99.5 min. - Single Values are maximum unless otherwise specified. - Certifications are available upon request.
Gasflux premium C-04™ Nickel Bronze Brazing rod in 3/32" (2.4mm) size. Gasflux C-04™ Nickel Bronze is a specially formulated low fuming copper/zinc alloy with additions of nickel, manganese, and iron to improve flow, increase strength, limit zinc fuming and improve flow characteristics. It is primarily used on steels and copper.
Size: 3/32" DIA
Length: 36"
Alloy 680 UNS/CDA C68000
AWS A5.8 Class RBCuZn-B
ASME SFA5.8 Class RBCuZn-B
Cu: 56.0 - 60.0
Zn: Balance
Fe: 0.25 - 1.20
Si: 0.04 - 0.20
Al: 0.01
Pb: 0.05
Ni: 0.20 - 0.80
Sn: 0.80-1.10
Total Others*: 0.50
*Total Others is copper (Cu) plus the sum of the named elements is 99.5 min. - Single Values are maximum unless otherwise specified. - Certifications are available upon request.
Gasflux premium C-04™ Nickel Bronze Brazing rod in 3/16" (4.8mm) size. Gasflux C-04™ Nickel Bronze is a specially formulated low fuming copper/zinc alloy with additions of nickel, manganese, and iron to improve flow, increase strength, limit zinc fuming and improve flow characteristics. It is primarily used on steels and copper.
Size: 3/16" DIA
Length: 36"
Alloy 680 UNS/CDA C68000
AWS A5.8 Class RBCuZn-B
ASME SFA5.8 Class RBCuZn-B
Cu: 56.0 - 60.0
Zn: Balance
Fe: 0.25 - 1.20
Si: 0.04 - 0.20
Al: 0.01
Pb: 0.05
Ni: 0.20 - 0.80
Sn: 0.80-1.10
Total Others*: 0.50
*Total Others is copper (Cu) plus the sum of the named elements is 99.5 min. - Single Values are maximum unless otherwise specified. - Certifications are available upon request.
Gasflux premium C-04™ Nickel Bronze Brazing rod in 1/4" (6.4mm) size. Gasflux C-04™ Nickel Bronze is a specially formulated low fuming copper/zinc alloy with additions of nickel, manganese, and iron to improve flow, increase strength, limit zinc fuming and improve flow characteristics. It is primarily used on steels and copper.
Size: 1/4" DIA
Length: 36"
Alloy 680 UNS/CDA C68000
AWS A5.8 Class RBCuZn-B
ASME SFA5.8 Class RBCuZn-B
Cu: 56.0 - 60.0
Zn: Balance
Fe: 0.25 - 1.20
Si: 0.04 - 0.20
Al: 0.01
Pb: 0.05
Ni: 0.20 - 0.80
Sn: 0.80-1.10
Total Others*: 0.50
*Total Others is copper (Cu) plus the sum of the named elements is 99.5 min. - Single Values are maximum unless otherwise specified. - Certifications are available upon request.
GF-78 Low Fuming Bronze in 3/8" (9.5mm) diameter is a high-quality bronze with additions of manganese and iron to increase hardness and strength while limiting zinc fuming. It is primarily used on steel and copper.
Size: 1/4" DIA
Length: 36"
Alloy 681 UNS/CDA C68100
AWS A5.8 Class RBCuZn-C
ASME SFA5.8 Class RBCuZn-C
Cu: 56.0 - 60.0%
Zn: Balance
Fe: 0.25 - 1.20%
Si: 0.04 - 0.20%
Al: 0.01%
Pb: 0.05%
Mn: 0.01 - 0.50%
Sn: 0.80-1.10%
Total Others*: 0.50%
*Total Others is copper (Cu) plus the sum of the named elements is 99.5 min. - Single Values are maximum unless otherwise specified. - Certifications are available upon request.